CLFO-150H High Temp Oven
High temp forced convection ovens provides higher temperature up to 350C then conventional ovens for special application for material research or testing laboratory. Motorized fan to force air circulation across heating elements and circulates into the chamber. The fan allows more consistent distribution of air and optional inert gas (Nitrogen Gas) purge system allows control oxidation of samples at high temperature treatment.
150 lt |
2 x 750 rpm circulation fan |
Energy efficient low thermal mass insulation |
Sophisticated digital controllers, multi-segment programmers. |
5 program, 5 step |
with the original leakage current relay, door switch |
| General Data | |
|---|---|
| Device : | CLOF-150 |
| Device Type : | Water Distiller |
| Identification | CE |
| Quality Management | DIN EN ISO 9001:2008 |
| General Technical Data | |
|---|---|
| Capacity | 150 LT |
| Temperature | Ambient +5°C to 350°C / PT100 |
| Accu./Uniformity | ± 0.5°C at 350°C / ±2.0°C at 100°C |
| Timer & Alarm | 99hr59min(with delay / Continuous run) Error status & Timer-end |
| Heat-up Time | 35 min. to 100°C, 75 min. to 250°C |
| Display | Graphic LCD |
| Resolution | Control : ±1.0°C, Display : ±1°C |
| Shelves | Included 2 ea SS Shelves |
| Controller | Full Automatic PID for Temp 5 Program and 5 Segment |
| Circulation | 2 EA High Performance Fan |
| Material-Specific Data | |
|---|---|
| Material of work area | 1.5 mm tihcknes SS 304 Material No : 1.4301 |
| Material of work area | 1.5 mm tihcknes SS 304 Material No : 1.4301 |
| Housing Material | Powder-coated 1.2 mm thick Zincor steel plate, material no: 1.0330 |
| Electrical Data | |
|---|---|
| Nominal voltage/ | 220 V – 50 Hz |
| Nominal frequency | |
| Power consumption | 3000 W |
| Mechanical Data | |
|---|---|
| Interior | (W x D x H) 500 x 500 x 600 mm |
| Exterior | (W x D x H) 945 x 660 x 880 mm |
| Packing Size | (W x D x H) 1045 x 760 x 980 mm |
| Gross Weight | 80 kg |
