CLWD-02 Water Distiller
CLS Water Stills are used in research and development, e. g. for preparing bacteriological and medical samples, for cell and tissue cultures as well as for the production of reagents and unguents. Moreover, distillate is used for cleaning and sterilisation processes, for buffered solutions as well as microbiological and analytical applications.
Evaporator easily accessible for cleaning purpose |
Water still for single distillation, suitable for both bench and wall mounting. |
The distillate storage tank accepts twice the hourly capacity of the still |
Economical energy consumption by distillation of the heated cooling water. |
Heating element, evaporator, storage tank and condenser made of stainless steel |
Thermostatic low water cut-off |
General Data | |
---|---|
Device : | CLWD-02 |
Device Type : | Water Distiller |
Identification | CE |
Quality Management | DIN EN ISO 9001:2008 |
General Technical Data | |
---|---|
Capacity | 2 LT |
Heating Power | 3000 W |
Cooling Water | 24 l/h |
Distillation Type | Single |
Controller | Full Automatic ON-OFF control |
Drain | Manual drain valve |
Optionals Data | |
---|---|
Heating & Cooling Liquid | |
Thermo Hose with Isolation | |
Storage Tank |
Material-Specific Data | |
---|---|
Material of work area | 1.2 mm tihcknes SS 304 Material No : 1.4301 |
Housing Material | 1.2 mm tihcknes SS 304 Material No : 1.4301 |
Electrical Data | |
---|---|
Nominal voltage/ | 220 V – 50 Hz |
Nominal frequency | |
Power consumption | 1500 W |
Mechanical Data | |
---|---|
Exterior | (W x D x H) 350 x 650 x 510 mm |
Packing Size | (W x D x H) 450 x 750 x 610 mm |